Categories

Contact Us

ADD: No.28 Tianshan Road, Xinbei District, Changzhou, Jiangsu Province, China

TEL: +86-519-85176163

Mobile: +8613912312751

FAX: +86-519-86649535

E-mail: sale@wotomotor.com

Stepper Motor

A stepper motor is an open-loop control element that converts an electrical pulse signal into an angular displacement or a linear displacement. In the case of non-overload, the speed and stop position of the motor depend only on the frequency of the pulse signal and the number of pulses, and are not affected by the load change.
When the stepper driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle in the set direction, called the "step angle". Its rotation is run step by step at a fixed angle. The motor can control the angular displacement by controlling the number of pulses to achieve the purpose of accurate positioning. At the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, thereby achieving the purpose of speed regulation.
A stepper motor is an induction motor. Its working principle is to use electronic circuits to supply power when the DC power is changed into components, and the multi-phase timing controls the current. This current is used to power the stepper motor, and the stepper motor can work normally. The driver is a time-sharing power supply for the stepper motor, multi-phase timing controller.
The best quality stepper motor with lower heating and noise, higher stability are offered by us. We are cheap stepper motor manufacturers and suppliers in China. If you are looking for one of such products, please be free to contact us.
  • Ac Servo Motor 3.8kw

    Contact Now

    Ac Servo Motor 3.8kw

    ​Our ac servo motor 3.8kw uses high-quality metal heat sink with a well-designed hot-channel layout to make the heat dissipation of the product fast and effective, and to ensure the normal operation of the circuit board.Read More

  • Nema 11 Step Motor Driver

    Contact Now

    Nema 11 Step Motor Driver

    This nema 11 step motor driver uses the leading motor current accurate detection technology, senseless brushless motor self-speed measurement, sense brushless motor rotation position detection, regenerative current constant current brake (or brake) technology and powerful PID...Read More

  • waterproof stepper motor nema 51

    Contact Now

    waterproof stepper motor nema 51

    This waterproof stepper motor nema 51 is made of high temperature resistant permanent magnets and high quality cold rolled steel sheets. The product specifications range from 170mm to 282mm. It features low noise, low vibration, low heat generation, and high reliability and...Read More

  • High torque stepper motor nema 42

    Contact Now

    High torque stepper motor nema 42

    Nema 52 three phase stepper motor SQUARE shape Technique Parameters All above is used normally , and we can customize according to your requirements . Drawing : Stepper motor lead wires : Torque frenquency characterstic :Read More

  • 3 axis cnc machine stepper motor kit

    Contact Now

    3 axis cnc machine stepper motor kit

    The 3 axis cnc machine stepper motor kit has the advantages of small size, simple structure, and internal virtual closed loop. Its built-in chip provides all the functions related to digital motion control, including position control, speed control and microstep control.Read More

  • high hybrid nema 23 stepper motor

    Contact Now

    high hybrid nema 23 stepper motor

    This high hybrid nema 23 stepper motor is a mechanical device that directly converts electrical pulses into angular positions. How much of its angle depends on the number of pulses. Together with its associated stepper motor drive, it forms a simple and low-cost open-loop system.Read More

  • hybrid stepper motor nema 17

    Contact Now

    hybrid stepper motor nema 17

    The hybrid stepper motor nema 17 hybrid step combines the advantages of permanent magnet and reactive. It is further divided into two phases, three phases and five phases: the two phase step angle is generally 1.8 degrees and the five phase step angle is generally 0.72 degrees.Read More

  • nema 24 stepping motor

    Contact Now

    nema 24 stepping motor

    The nema 24 stepper motor is a high torque stepper motor with a size of NEMA 24 (60 mm) and a 1.8° step angle (full step). The stepper motor has a flange size of 60x60 mm, which is slightly larger than the ST5918 series stepper motor.Read More

  • 1.8 degree 2 phase stepper motor nema 11

    Contact Now

    1.8 degree 2 phase stepper motor nema 11

    This 1.8 degree 2 phase stepper motor nema 11 has lower noise, high accuracy, high efficiency and short circuit. This two-phase stepper motor consists of a stator and a rotor. Its stator has 8 poles or 4 poles, a certain number of small teeth are evenly distributed on the...Read More

  • Micro Stepper Motor Nema 14 Frame

    Contact Now

    Micro Stepper Motor Nema 14 Frame

    Nema 14 stepper motor Technique Parameters Nema 14 series 35ST series stepper motors : All above is used normally , and we can customize according to your requirements . NOTE : 1. shaft and wire length can be customized . 2. Motor shaft can be round shaft ,flat shaft...Read More

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML | trade-global.com

Copyright © Changzhou Weitong Electromechanical Manufacturing Co.,Ltd All rights reserved.